Ultimate Neoprene Rod Sleeve

Bought this thinking it would be a fairly standard sleeve of one of my 2 rods in that size range but doesn't fit either with a reel (hto and rovex spinners) as the section for the butt is too short. Last ditch tried a 3 piece method rod but same issue at the other end of the reel pocket, even with small sleeves doesn't fit. Could do with a larger reel pocket, or even better, for site to list more measurements and if it is only ultimate rod specific.

+ Well made budget sleeve

- Doesn't fit any of my fairly standard rods in the size rage

The zipper can be opened on two sides and seems to me very durable attached to the neoprene. A kind of mesh is used at the bottom and in front of the reel compartment so that air can enter. So you can store the rod with attached reel even wet. As for the price, if you buy a case in neoprene for just your reel then you have already lost a large part of the purchase price of these cases. Attention! The length of the sleeve is noted on the neoprene. A sleeve of 160 cm measures exactly 160 cm. Therefore, the rod parts should not be longer. For a two-piece 3m rod, a 150cm sleeve is not enough. Because of the closure the separate parts are longer than 150 cm. So always take the sleeve longer than half the length of your rod. Of course, measuring the rod parts beforehand is even wiser.

+ - Solid material, both neoprene and zippers

+ - Ability to store the rod wet

+ - Very light in weight